MetalFil 2.85mm Ancient Brass 750 gram

V177-285METFIL-BRASS-0750

Sorry! We found no seller for this product ? find the similar products in the end of this page
MetalFil 2.85mm Ancient Brass 750 gram
Brand: FormFutura
Category: Home & Garden > DIY > Kitchen & Bathroom DIY
EAN: 8718924477250

Comments:

Formfutura MetalFil Classic Copper is a composite PLA (polylactic acid) filament that is gravimetrically filled with approximately 80% copper powder. The high copper content in MetalFil Classic Copper makes 3D printed objects nearly indistinguishable from genuine copper casted objects. MetalFil Classic Copper can be post-processed with various patina effects.

Unique features

  • Very high copper-filling of 80%
    • Real copper look, heavyweight, and cold copper metal feel
    • Approximately 300% heavier than PLA (density of 3.4 g/cc)Compatible with full metal, PEEK, and PFTE hotends
  • Compatible with direct drive and Bowden style extruders
  • Compatible with ≥ 0.4mm hardened nozzles with retraction settings enabled
  • Easy to post-process
    • MetalFil can be brushed, sanded, polished, waxed, coated and patina post-processed

Applications

  • Aesthetics, design, and art
  • Figurines and miniatures

General printing guidelines *

Nozzle size: ≥ 0.4mm

Layer height: ≥ 0.2mm

Experience level: Beginner

Print temp: ± 215 - 235 C *

Fan speed: 50-100%

Heat bed: ± 0 - 60 C

Enclosure needed: No

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) If blobs/lumps form around the nozzle then your print temperature is too high.

Post processing MetalFil - Classic Copper

  • Brushing and/or sand grinding -Once printed MetalFil - Classic Copper objects can very easily be brushed with a brass brush or sanded with fine-grit sandpaper. By brushing and/or sand grinding your printed object you will brush/shine up the high concentration of copper powders.
  • Build-in white polish feature -After being brushed and/or sanded MetalFil - Classic Copper will reveal its white polish feature. A very thin white layer/haze on your object will now allow you to easily polish your 3D print into a beautiful copper object.
  • Professional polishing with a rotary tumbler -Post-processing a MetalFil - Classic Copper 3D printed object with a rotary tumbler will make your FDM 3D printed object indistinguishable from genuine copper casted objects.
  • Patina post-processing -You can create several patina effects on MetalFil - Classic Copper printed objects in just one day time. With an ammonia and soda treatment you can for instance easily create a beautiful ancient green/blue weathering effect on your copper object.
  • Waxing and coating -After every above-mentioned post-processing measure, you can always wax or coat your printed object to get an incredible shine effect. Waxing can be done with products such as beeswax and for coating one can think about products such as XTC-3D.
  • Abrasiveness -Please be aware that MetalFil filaments contain a very high concentration of metal powders, which have an abrasive nature. In general, these metal powders will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend using nozzles from stainless steel or other hardened alloys.

Filament length

: 3.4 g/cc

50 gr coil

0.75 Kg spool

1.5 Kg spool

Ø 1.75mm

± 6.1m

± 92m

± 183m

Ø 2.85mm

± 2.3m

± 35m

± 69m

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

Compliance *

This filament is compliant with the below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Similar Products

Artiss Bookshelf DIY Pipe Shelf 4 Tiers - INGE

Artiss Bookshelf DIY Pipe Shelf 4 Tiers - INGE

117 AU$

Thinking of adding a rustic element into your home and still have the practical side of it? Why not get this pipe shelf? It features a 4 level storage and can be mount either on a ceiling or by the floor. How flexible is it? You can always have it

Rotating Spice Rack Organizer with 20 Pieces Jars for Kitchen

Rotating Spice Rack Organizer with 20 Pieces Jars for Kitchen

80 AU$

Features:

Modern Rotating Spice Rack: The spice rack organizer has excellent flexibility and sturdiness. It can be rotated 360 without any resistance. The modern design and attractive stainless-steel finish make it suitable

Spice Rack Organizer with 12 Pieces Jars for Kitchen

Spice Rack Organizer with 12 Pieces Jars for Kitchen

84 AU$

Features:

Spice Rack Set: The spice rack organizer has excellent flexibility and sturdiness. The modern design and attractive stainless-steel finish make it suitable for every kitchen them.
12 Empty Spice Jars: The spice

Artiss Floating DIY Pipe Shelf 6 Tiers - IRA

Artiss Floating DIY Pipe Shelf 6 Tiers - IRA

227 AU$

DIY Industrial 6 Level Pipe Shelf

Ever wanted to add in a rustic sense of feel into your home? Don't know where to start? Why not start with this shelf? Easy to assemble and stand out in the crowd.

Featuring a ru